aitecs® - B. Braun - defibtech - HAMILTON MEDICAL - PHILIPS - PHYSIO CONTROL - ResMed - ResQ-Care - ZOLL
Wall-Mount Philips MRx -S/P
Philips offers a wide range of defibrillators. We have developed various mounts for these products; rigid wall and vehicle mounts, swivelling wall and vehicle mounts and a stretcher / bed mount. These are described in more detail on the following pages.
Features Wall-Mount MRx -S/P
√ Unlocking with just one hand
√ Easy handling
√ Small installation depth
√ Low weight
√ Can be swivelled by 60°
√ Available with and without charging functionality
√ Versions: Stainless steel (V2A) and coated (individual colours possible)
Further information is given in “Product information”.
Product information
Details Mount MRx -S/P
A functional, compact, very light and secure mount for the PHILIPS MRx defibrillator with intuitive operation from MCS medical concept solutions GmbH.
The mount can be swivelled by 60°, it has three positions (left, middle and right) and has an active charging functionality. In addition, the mount has been tested for safety by the 20G crash test in accordance with DIN EN 1789:2014 and EASA CS-27.
Technical data:
W 220 mm x H 420 mm x D 140 mm
Weight: 6,0 Kg
Note:
The charger is not included in the scope of supply. Contact your field service salesman from Philips.
The mount is available in the following versions:
Mount
Description
Part number
Mount
Wall-Mount MRx S/P with charging functionality
Description
Rotatable mount (60°) with charging functionality
Colour: Stainless steel
Part number
MCS752001
Wall-Mount MRx S/P (with charging functionality)
Rotatable mount (60°) with charging functionality
Colour: Stainless steel
MCS752001
Mount
Wall-Mount MRx S/P without charging functionality
Description
Rotatable mount (60°) without charging functionality
Colour: Stainless steel
Part number
MCS752000
Wall-Mount MRx S/P (without charging functionality)
Rotatable mount (60°) without charging functionality
Colour: Stainless steel
MCS752000
Accessories
Description
Part number
Accessorie
Description
This installation plate from MCS permits the mounting / adaptation of the mount for the Philips MRx defibrillators on carrier rails. The installation is simple and quick. Fasten the plate by placing the claws on the rails and locking the handles (4 pieces). The mount for the defibrillator is installed with a few hand grips by fixing it to the installation plate with 4 bolts. This plate is tested with 20G crash.
Part number
MCS701500
This installation plate from MCS permits the mounting / adaptation of the mount for the Philips MRx defibrillators on carrier rails. The installation is simple and quick. Fasten the plate by placing the claws on the rails and locking the handles (4 pieces). The mount for the defibrillator is installed with a few hand grips by fixing it to the installation plate with 4 bolts. This plate is tested with 20G crash.
MCS701500
